BandungJuni 2014Mei 2014Technical, Mechanical & EngineeringYogyakarta

Proses Overhaul Turbine

    Instructor by: Cecep Slamet Abadi, ST


    Periodically, all industrial equipment including turbines require a major overhaul. The level of work required for repairs will depend a lot on the operating conditions such as fuel quality, combustion air and how the unit is loaded. Improvement in order to run smoothly and to complete all necessary work, planning should begin long before repairs begin.


    A. Introduction

    B. Preparation

    1. Maintenance records
    2. Inspection
    3. Drawings
    4. Lifting devices and rigging
    5. Scheduling
    6. Procurement of equipment and supplies

    C. Basis for Opening Turbine

    1. Hystory
    2. Other Turbine in the Plant

    D. Disassembly and Repair

    1. Turbine Workscope
    2. Disassembly
    3. Summary of Internal Damage Found
    4. Casing and Diaphragm Damage
    5. Casing Repair
    6. Problem With Boring the Case
    7. Diaphragm Repair
    8. Diaphragm Splitline Repairs
    9. Diaphragm Sealing Surface Repairs
    10. Nozzle Box Repair
    11. Rotor Repair
    12. Spare Rotor Repair

    E. Field machining procedures

    1. Seal rings
    2. Facing plates
    3. Wicket gate bushing line boring
    4. Redoweling

    F. Coupling boltholes Casing splitline gap in the low pressure section

    G. Reassembly

    1. Torque or stretch of bolts
    2. Unit alignment
    3. Wicket gate adjustment
    4. Gaskets and packing
    5. Governor

    H. Conclution

    1. Borescope Inspection Inspections
    2. Final Inspection
    3. Initial Startup
    4. Operational Reading
    5. Vibration Monitoring
    6. Efficiency Meassurement and Power Loss 





    Case Study




    Training Kit



    Lunch + 2 X Coffee Break



    TRAINING FEE for Proses Overhaul Turbine

    Rp.7.000.000,- / peserta / non recidential

    Minimum 5 orang

    Form Pre-Registrasi

    Data Materi Training

    Topik Training : Proses Overhaul Turbine
    *Jumlah Peserta Estimasi Jumlah Peserta yang di ajukan
    *Nama Peserta Yang Didaftarkan

    Personal Data

    *Jabatan Jabatan/Divisi/Departement
    *Nama Perusahaan
    *Alamat Perusahaan
    *Email Perusahaan
    *Email Alternatif eg: gmail, yahoo, hotmail
    *Telepon Kantor
    * Harus di isi
    , , , , , , , , , ,

    Related Articles

    Check Also

    *Semua jadwal training yang ada di Training SDM adalah milik dari masing-masing vendor penyelenggara training.